ALCO-EP™ PREMIUM MULTI-PURPOSE GREASE
Versatile aluminium complex grease with a high level of rust and oxidation inhibitors, as well as CZ-EX, Jet-Lube's extreme pressure additive.

ALCO-EP-73 PLUS™ EXTREME SERVICE MULTI-PURPOSE GREASE
Premium, state of the art, multi-purpose aluminium complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics.

API-MODIFIED HIGH PRESSURE THREAD COMPOUNDS                                                                                   A high-pressure thread compound that conforms to or exceeds the requirements of API RP 5A3 and former API BUL 5A2. It also contains rust and oxidation inhibitors blended in JET-LUBE’s unique grease compounded from custom-refined, low-sulphur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. API-MODIFIED will seal and withstand pressures to 10,000 psi and will not harden or dry. The lubricating characteristics of API-MODIFIED reduce friction in the makeup of casing and tubing, preventing galling and wear. Maximum thread engagement is ensured, providing optimum leak resistance. Inhibitors in API-MODIFIED provide maximum protection against rust and corrosion of threaded surfaces. It is conductive to reduce the possibility of electrolytic corrosion by preventing the formation of galvanic cells in the presence of salt water and other corrosive fluids.

JET-LOK II EPOXY BASED THREADLOCK KIT For OCTG Applications                                                       Use when tubular connections have to be permanently or semi-permanently locked together, for example, where they are to be left installed for a longer than usual time or to prevent disconnection when reverse direction of rotation is to be applied. Jet-Lok ll is a better alternative than welding as it allows future disconnection by heating to over 290˚C. Jet-Lok ll can also be used on rotary shouldered connections to prevent disconnection if reverse direction needs to be applied.

JET-LUBE 21® DOUBLE DUTY TOOL JOINT COMPOUND                                                                      Environmentally friendly JET-LUBE 21® has been formulated to provide a superior level of performance for the increasing demands of today's oilfield market. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. NLGI Grade 1.

KOL'R-KING® DRILL COLLAR COMPOUND                                                                                                KOL'R-KING® contains 60% pure metallic lead, along with CZ-EX® (JET-LUBE's extreme pressure additive), rust and corrosion inhibitors, plus special proprietary binders to reduce lead buildup and minimize the need for wire brushing on breakout. The premium quality metallic lead in KOL'R-KING meets or exceeds the lead specifications listed in the First Appendix of API Recommended Practice 5A3. NLGI Grade 1-1/2 - 2.
 

KOPR-KOTE® TOOL JOINT & DRILL COLLAR COMPOUND
A Premium quality, unleaded compound containing copper flake, graphite, CZ-EX (JET-LUBE's extreme pressure additive), rust and corrosion inhibitors, anti-oxidants and other natural extreme pressure and anti-wear additives.
 

KORR GUARD STORAGE COMPOUND                                                                                                          KORR-GUARD™ is a water displacing, specialized formula utilizing a unique approach to rust and corrosion resistance. Many of the corrosion resistant greases on the market are petroleum base oils thickened with 3% to 9% soap. The soaps are typically lithium, aluminium and anhydrous calcium and the resulting grease is treated with 2-5% rust inhibitor. The rust inhibitor is oil soluble and surface active, wanting to wet out on the steel surface. Over a time, the oil separates and the low additive content depletes. KORR-GUARD actually complexes the rust inhibitor in high quantity as a component in the thickener. The thickener holds the rust inhibitor in place so additive depletion becomes a less significant factor in long term storage.
 

POW'R-KOTE® PREMIUM NON-METALLIC, EXTREME SERVICE TOOL JOINT COMPOUND                          A new generation, PREMIUM drill collar and tool joint compound, POW’R-KOTE®, is formulated from a patented blend of non-metallic, environmentally acceptable ingredients. POWER-KOTE exceeds industry performance and environmental standards and is highly recommended for large-diameter drill collars in the most extreme drilling conditions, including geothermal wells, high angle holes, extended reach, sidetrack re-entry, and horizontal drilling applications. This premium product utilizes sophisticated, high strength polymers as well as graphite and other naturally occurring, extreme pressure and anti-wear additives in a synergistic blend that locks together under high loads to resist galling and seizure. The exceptional film strength is measured by the 1000 kgf weld point in the ASTM D-2596 4-Ball E.P. test. The additives package is blended into JET-LUBE’s high temperature, aluminium complex base grease that is fortified with antioxidants and rust and corrosion inhibitors to provide long lasting performance in a wide range of conditions. NLGI Grade 1.

RUN-N-SEAL® METAL FREE THREAD SEALANT                                                                                          RUN-N-SEAL® is a patented metal-free, high-pressure sealant alternative for API-MODIFIED. The compound contains graphite and other non-metallic, inorganic, anti-wear additives blended into a high-quality lithium complex base grease. RUN-N-SEAL contains a large volume of solids enhanced by a higher concentration of large-sized particles. The improved distribution of particle sizes and volume of solids provides an excellent seal in large and small diameter, non-shouldered threads. The lithium complex grease provides a high melting point, ensures brushability over a wide range of temperatures, and has excellent inherent water resistance. It sticks to wet and oily steel, ensuring the compound will not wash off threads. NLGI Grade 1.

RUST-GUARD LIQUID CORROSION INHIBITOR
RUST-GUARD™ is a water displacing specialized formula which dries to a uniform, thin waxy film to effectively seal out moisture and corrosion. RUST-GUARD provides long-term protection on all metal and alloy surfaces, even under harsh environmental conditions such as water, high humidity or salt spray. Bulk formula typically provides six months outdoor and one year indoor protection against rust and corrosion. RUST-GUARD may be used both indoors or outdoors as a protective coating on raw materials, machined parts, tools, pipe, fittings, valves, etc., while they are being stored or in transit. RUST-GUARD will not crack or flake off and, since it is applied in aerosol or liquid form, it penetrates fully into even the smallest crevices to displace moisture and prevent rust and corrosion. RUST-GUARD is green in colour to facilitate visual check of product application and is easily and safely removed by use of a safety solvent such as JET-LUBE® CLEAN-UP™.

JET-LUBE® SEAL-GUARD™ PREMIUM THREAD COMPOUND                                                                      JET-LUBE® SEAL-GUARD™ represents the next generation in thread compound technology and design. Just as oilfield pipe materials and connections are engineered for specific applications and field service requirements, so must thread compounds be formulated to meet critical performance requirements. The thread compound must be tailored to the connection design, material (alloy), operating conditions and environmental and occupational health restrictions. JET-LUBE SEAL-GUARD has been specifically formulated to meet the performance requirements of proprietary, metal-to-metal seal and high-interference connection designs.

TF-15® METAL FREE THREAD SEALING COMPOUND
TF-15® is a high-pressure sealant containing PTFE, graphite, CZ-EX® (JET-LUBE’s extreme pressure additive), and rust, corrosion, and oxidation inhibitors. All are blended in JET-LUBE’s aluminium complex grease manufactured using highly refined, low-sulphur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. TF-15 is highly recommended for use on fibreglass casing and tubing by several manufacturers. TF-15 assures tight makeup at low torque and allows easy breakout without seizing, stripping, or galling. It provides a permanent seal and maintains joint efficiency under vibration, pressure, surge, and temperature fluctuations. It is particularly useful in areas subject to salt water, a wide variety of oils, solvents, gases (except oxygen), acids, alkalis and steam. Withstands liquid pressures to 10,000 psi. NLGI Grade 1-1/2.