JET-LUBE HDD Auto and Manual thread compounds are Lead-free, containing Copper flake, graphite, rust and corrosion inhibitors. They also contain anti-oxidants, extreme pressure and anti-wear additives, blended into Jet-Lube base grease. HDD Auto grade uses special Arctic oil for

ADVANTAGES
  • Contain no Lead or Zinc.
  • Extreme pressure additive provides additional protection against seizing and galling. Inhibitors protect against rust and corrosion.
  • Stick to wet joints.
  • Smooth grease base for brushability and stability over a wide temperature range.
  • Consistent makeup.
  • Unequalled resistance to downhole makeup.
  • Autolube grade is suitable for pump application, Manual is for brushing .

HDD Manual

HDD and Auger Thread Compound

HDD Manual

Description

HDD Auto and Manual use a lower viscosity base oil more suitable for HDD equipment, compared to oilfield operations.
HDD Auto and Manual give superior adhesion to wet steel surfaces and resistance to water wash-off.

 

Applications

HDD Auto and Manual are formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. As stress levels rise above 50% of yield, the friction factor increases limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joints to make-up completely without stand-off or deformation.

 

Code #
Size
Service Rating
SDS
TDS
Get Assistance
AUTOLUBE
JA19750
JA19723
JA19712
JA19793

MANUAL
JA19823
JA19812
JA19816
JA19893
AUTOLUBE
400 g cartridge
4.5 kg pail
8 kg pail
20 kg pail

MANUAL
4.5 kg pail
8 kg pail
16 kg pail
20 kg pail
AUTOLUBE
-55°C to 205°C
-67°F to 401°F



MANUAL
-18°C to 232°C
0 °F to 450°F
acrobat
Request a Translation
acrobat
Email for Assitance